Inputs: Thermocouple: K, J, R, S, E, T, N, PL-II, C (W/Re5-26) External resistance: 100Ω or less. B Thermocouple: External resistance: 40Ω or less. RTD: Pt100, JPt100 3-wire system, allowable input wire resistance (10Ω or less per wire). DC Current: 0 to 20 mAdc, 4 to 20 mA input impedance 50Ω (50Ω shunt resistor sold separately). DC Voltage: 0 to 1 VDC. Input Impedance: 1MΩ or greater.
Output Ratings: Relay Contact: 3A @ 250 VAC, Resistive: 1A @ 250 VAC inductive (CØS=0.4), Electric life 100,000 cycles. Switched Voltage (for SSR drive): 12 VDC @ 40 mA max. (short-circuit protected). DC Current: 4 to 20 mAdc, load resistance: max. 550Ω output accuracy: ±0.3% of output span. Resolution: 12,000 counts.
Control Type: P, PI, PD, PID, Self Tune®, On-Off, Process Retransmission.
Proportional Band: 0.0 to 110.0% (ON/OFF when set to 0.0).
Integral Time: 0 to 1000 seconds (off when set to 0).
Derivative Time: 0 to 300 seconds (off when set to 0).
Proportional Cycle: 1 to 120 seconds.
Manual Reset: Proportional band converted value.
Output Limit: 0 to 100% (DC current output type: -5 to 105%).
Hysteresis: Thermocouple and RTD Input: 0.1 to 100.0 degrees; DC Voltage and Current Input: 1 to 1000 (decimal point place follows the selection).
Power Requirements: 120-240 VAC, 50-60 Hz, 24 VAC 50-60 Hz optional.
Power Consumption: Approximately 6VA.
Accuracy: Thermocouple Input: ±0.2% of input span, ±1 digit or 4°F (2°C), whichever is greater. R, S Input: 0 to 400°F (0 to 200°C): ±6°C (12°F). B Input: 0 to 600°F (0 to 300°C): Accuracy is not guaranteed. K, J, E, N Input less than 32°F (0°C): ±4% of input span ±1 digit. RTD Input: ±0.1% of input span ±1 digit or ±2°F (1°C), whichever is greater. DC Voltage Input: ±0.2% of input span ±1 digit. DC Current Input: ±0.2% of input span ±1 digit.
Input Sampling Period: 0.25 seconds, 4 Hz.
PV Display: Red LED 4-digit character size: 7.5 x 4.1 mm (H x W).
SV Display: Green LED 4-digit character size: 7.5 x 4.1 mm (H x W).
Display Resolution: 1 count, 1 degree, or 0.1 degree, depending on selected range.
Memory Backup: Nonvolatile memory, no battery used.
Ambient Temperature: 32 to 131°F (0 to 50°C).
Ambient Humidity: 35 to 85% RH (non-condensing).
Weight: Approx. 5.3 oz (150 g).
Agency Approvals: CE, UL, cUL.