Series VFLO Venturi Flowmeter with Magnehelic® Gage

Specifications

Service:

Air and non-combustible, compatible gases.

Wetted Materials:

Aluminum, silicone, acrylic, polycarbonate, high carbon steel, low carbon steel, brass, paper, acrylic paint, enamel paint, alkyd coating, nickel plate, zinc plate, helsel FC, 300 series stainless steel, PTFE, Loctite® AV sealant, commercial black rubber, neoprene, samarium cobalt, nickel alloy steel cover, beryllium copper.

Housing:

Die cast aluminum case and bezel, with acrylic cover. Exterior finish is coated gray to withstand 168 hour salt spray corrosion test.

Accuracy:

±2.5% FS.

Pressure Limits:

-20" Hg to 15 psig (-0.677 bar to 1.034 bar); MP option: 35 psig (2.41 bar). For applications with high cycle rate within gage total pressure rating, next higher rating is recommended.

Overpressure:

Relief plug opens at approximately 25 psig (1.72 kPa).

Temperature Limits:

20 to 140°F (-6.67 to 60°C).

Size:

4" (101.6 mm) diameter dial face.

Mounting Orientation:

Diaphragm in vertical position. Consult factory for other position orientations.

Process Connection:

Female NPT of nominal line size. See Model Chart page.

Weight:

Gage only: 1 lb 2 oz (510 g), MP & HP 2 lb 2 oz (963 g); Venturi: see Model Chart page.

Features

• Gradual Venturi profile reduces pressure losses through meter helping to insure a more accurate measurement to meet measurement specifications
• Easy to read gage through undistorted plastic face permits viewing from far away
• Patented design provides quick response to pressure changes means no delay in assessing critical situations
• Durable and rugged housing and high-quality components combined provides longservice life and minimized down-time

Drawings

• CAD Drawing in format .DWG
• Adobe Reader in format .PDF

Model Chart