Model LDT Leak/Over Temperature Detection Relay

Shaft Seal Leak and Stator Temperature Monitor

The Model LDT is used to monitor the shaft seal and the stator temperature of a submersible pump to detect a leak or over temperature before pump failure. A leak is detected by sensing the status of a float or conductivity switch installed in the seal cavity. When this resistance drops below the set sensitivity, the output relay energizes and the LED indicator illuminates. When the seal failure condition clears, the relay automatically resets. A normally closed temperature switch mounted on the stator detects over temperature. The temperature safety feature incorporates a bistable relay that retains its position during power loss and latches on until the remote reset button is pressed. The LDT has adjustable leak sensitivity from 1k to 35k ohm. Installation is made simple with a surface mount configuration.

Models & Ordering

Shipping Information

All shipping times are dependent on product availability at time of shipment.

Although we make every effort to ensure a continuous supply of our products, occasional circumstances may force us to temporarily run out of a product, or have shipping delays. Should this occur, customers will be notified soon after placement of any orders for such products and, if applicable, items will be put on backorder. For orders requiring expedited shipment, our customer service team can be contacted to confirm product availability

COVID-19 Update: Due to high customer demand, lead time on some products may be up to two weeks. While this is a developing health situation, we are working continuously to take the necessary measures to ensure that the products you need are available with minimal interruption.

Model Description Usually Ships* Price Code Order
Ships: 3-4 Weeks
Price: $198.00
Leak/over temperature detection relay. 3-4 Weeks* $198.00 N Order


Power Requirement:
120 VAC, 50/60 Hz.
Power Consumption:
4 VA (approximate).
1k to 35k ohm adjustable.
Temperature Limits:
Operating: -4 to 131°F (-20 to 55°C); Storage: -40 to 185°F (-40 to 85°C).
Sensor Voltage:
12 VDC.
Switch Type:
(2) SPDT.
Electrical Rating:
10 A @ 120 VAC resistive.
Response Times:
Leakage Trip: 1 s; Leakage Reset: 1 s; Temperature Trip: 0.1 s.
Green LED illuminates under normal operation. Red LED's illuminate when leak or over-temperature is detected.
Polycarbonate dust cover.
Surface mount.
17 oz (482 g).
Agency Approval:
cUL, UL.

Product Literature


Catalog Pages



Photo Downloads

You must be logged in to view this content.
Click here to login to your account.

Product Reviews

Only registered users can write reviews. Please Sign in or create an account