Series DLD Dual Channel Leak Detection Relay

Shaft Seal Leak Protection

Series DLD Dual Channel Leak Detection Relay is used to monitor the shaft seals of two submersible pumps to detect a leak before pump failure. A leak is detected by sensing the status of a float or conductivity switch installed in the seal cavity. When this resistance drops below the set sensitivity, the output relay energizes and the corresponding LED indicator illuminates. The DLD offers normally open relay contacts to energize an alarm or de-energize the pump in the event of a leak. When the seal failure condition clears, the relay automatically resets.

Models & Ordering

Model Description Usually Ships Price Code Order
DLD-ACY
Ships: 1-2 Weeks
Price: $185.00
Dual channel leak detection relay, 10k to 25k ohm adjustable. 1-2 Weeks $185.00 N Order
DLD-ACZ
Ships: Consult Factory
Price: $185.00
Dual channel leak detection relay, 4.7k to 100k ohm adjustable. Consult Factory $185.00 N Order

Specifications

Power Requirement:
120 VAC, 50/60 Hz.
Power Consumption:
2 VA (approximate).
Isolation Voltage:
2500 V.
Temperature Limits:
Operating: -4 to 131°F (-20 to 55°C); Storage: -40 to 185°F (-40 to 85°C).
Switch Type:
(2) N.O. SPST.
Switch Voltage:
9 VDC.
Electrical Rating:
5 A @ 120 VAC resistive, 345 VA inductive.
Response Times:
Energize: 6 ms (approximate); Release: 2.5 ms (approximate).
Indicators:
Respective red LED illuminates when leak is detected.
Enclosure:
Polycarbonate dust cover.
Mounting:
8-pin octal.
Weight:
8 oz (227 g).
Agency Approvals:
cUR, UR.

Product Literature

Manuals

Catalog Pages

Approvals

Drawings

Photo Downloads

You must be logged in to view this content.
Click here to login to your account.