Dwyer logo
Series 2000
Magnehelic® Differential Pressure Gage
Indicate Positive, Negative or Differential, Accurate within 2%
 
OPTIONS:
  • ASF Adjustable Signal Flag
  • HP High Pressure Option
  • LT Low Temperatures to -20°F
  • MP Med. Pressure Option
  • SP Setpoint Indicator
  • Scale Overlays Red, Green, Yellow, Mirrored or Combination, Specify Locations
ACCESSORIES:
  • A-299 - Mounting bracket, flush mount Magnehelic® gage in bracket. Bracket is then surface mounted. Steel with gray hammertone epoxy finish.
  • A-300 - Flat aluminum bracket for flush mounting Magnehelic® gage.
  • A-310A - 3-way vent valve, plastic, 1/8" NPT to 1/4" metal tubing, 80 psi rating, replaces former Model A-310 (brass).
  • A-432 - Plastic carrying case for Magnehelic® gage of standard range, except high pressure connection, includes 9 ft (2.7m) of 3/16" ID rubber tubing, stand-hang bracket & terminal tube with holder.
  • A-321 - Brass safety relief valve, protects Magnehelic® gage or Photohelic® switch/gage against over pressure due to regulator failure, etc, opens at 10 psi. Mounts in tee fitting. 1/4" NPT(M) (use two for DP application).
  • A-605 - Air filter kit - adapts any standard Magnehelic® gage for use as an air filter gage. Includes aluminum surface mounting bracket with screws, (2) 5 ft (1.5 m) lengths of 1/4" aluminum tubing, (2) static pressure tips & (2) molded plastic vent valves.
  • A-464 - Flush mount kit for Magnehelic® gages.
  • A-610 - Pipe mounting kit for 1-1/4" to 2" pipe.
  • A-465 - Flush mount space pressure sensor.
  • A-414 - 316 SS clean room pressure sensor.
  • A-301 - Static pressure tip, for 1/4" metal tubing connection.
  • A-302 - Static pressure tip, for 3/16" and 1/8" ID plastic or rubber tubing.
  • A-303 - Portable static pressure tip, for 3/16" ID rubber or plastic tubing with 3" insertion.
  • A-417 - Static pressure pickup, for use in clean rooms, 100 micron filter picks up static pressure, stainless steel wall plate fits 2" x 4" electrical box, sealed with foam gasket, screws included. Barbed brass fitting holds 1/8" to 5/32" ID tubing.
  • A-418 - Static pressure pickup, room mount with Delta style plastic enclosure fits 2" x 4" electrical box, mesh screen hides static pressure pickup port, clean connection to 1/8" to 5/32" ID tubing and pressure sensor. Sealed with foam gasket, screws included.
  • A-419 - Static pressure pickup ceiling mount, plate rests on top of standard 3/4" thick ceiling tile while 100 micron filter faces down through 5/8" hole in tile, screws included for optional mounting to junction box, barbed fitting holds 1/8" to 5/32" ID tubing.
  • A-420 - Static pressure pickup for roof/outside mount, NEMA 4X (IP66) rated structure withstands harsh environmental elements, structure is 3-5/8" across and 2-1/2" deep, EMT conduit fitting is 1/2", pressure connection is brass barbed fitting for 1/4" tubing.
  • A-307 - Static pressure fitting, for 1/4" metal tubing connection.
  • A-308 - Static pressure fitting, for 3/16" and 1/8" ID plastic or rubber tubing.
  • A-306-A - Outdoor static pressure sensor, provides average outdoor pressure signal for reference in building pressurization applications, includes sensor, 50 ft vinyl tubing, mounting bracket and hardware.
  • A-201 - Rubber tubing, 3/16" ID, 9 ft length.
  • A-202 - Rubber tubing, 3/16" ID, lengths to 50 ft, per ft.
  • A-203 - PVC tubing, 1/8" ID x 1/4" OD, per ft.
  • A-210 - Aluminum tubing, 1/4" OD, 5 ft length, 500 psi maximum pressure @ 200°F.
  • A-211 - Aluminum tubing, 1/4" OD, 50 ft length, 500 psi maximum pressure @ 200°F.
  • A-220 - Flexible vinyl tubing, clear 3/16" ID x 5/16" OD, lengths to 500 ft, per ft, 45 psi maximum pressure @ 73°F.
  • A-221 - Flexible vinyl tubing, clear 1/8" ID x 3/16" OD, lengths to 500 ft, per ft, 40 psi maximum pressure @ 165°F.
  • A-222 - Flexible vinyl tubing, clear .240" ID x .375" OD, lengths to 500 ft, per ft, 35 psi maximum pressure @ 73°F.
  • A-223 - Black polyethylene 1/8" ID 1/4" OD, 10 ft length, 200 psi maximum @ 140°F.