|
SPECIFICATIONS
Body: 3-piece.
Line Size: 1/2˝ to 4˝.
End Connections: Tri-Clamp (liner
meets BS 4825, part 3).
Pressure Limit: 1/2˝ to 2˝: 1000 psi (69
bar) WOG. 2-1/2˝ to 4˝: 800 psi (55 bar)
WOG.
Wetted Materials:
Body, Ball, End Caps: CF8M Stainless
Steel.
Stem: 316 Stainless Steel.
Seats, Body Seal, Thrust Washer,
Packing: TFE.
Temperature Limit: -40 to 450°F (-40
to 232°C) CWP.
Other Materials: 304 Stainless Steel,
Vinyl.
Agency Approvals: Meets 3A.
ACTUATORS
Electric
Power Requirements: 115 VAC, 60
Hz, single phase. Optional 220 VAC,
24 VAC, 12 VDC, 24 VDC.
Power Consumption (Locked Rotor
Current): Two position: U11: 0.55A;
U12 & U14: 0.75A; U15 & U17: 1.10A;
U18: 2.60A; U19: 2.90A
Modulating: V11: 0.55A; V12 & V14:
0.75A; V15 & V17: 1.10A; V18: 2.60A;
V19: 2.90A.
Cycle Time (per 90°): Two position:
U11: 2.5 seconds; U12: 5 sec; U14: 10
sec; U15:15 sec; U17: 30 sec; U18: 12
sec; U19: 14 sec. Modulating: V11: 5 seconds; V12: 10
sec; V14: 20 sec; V15: 30 sec; V17: 60
sec; V18: 24 sec; V19: 28 sec.
Duty Cycle: U11: 75%; U12, U14,
U15, & U17: 25%; U18 & U19: 100%.
Modulating: 75%.
Enclosure Rating: NEMA 4. Optional
NEMA 7.
Housing Material: Aluminum with
thermal bonding polyester powder finish.
Temperature Limit: -40 to 150°F (-40
to 65°C).
Electrical Connection: 1/2˝ to 2-1/2˝:
1/2” NPT; 3˝ & 4˝: 3/4˝ NPT.
Modulating Input: 4 to 20 mA.
Standard Features: Manual override,
thermal overload protection, permanently
lubricated gears, and position
indicator except modulating units.
Pneumatic “DA” and “SR” Series
Type: DA Series is double acting and
SR Series is spring return (rack and pinion).
Normal Supply Pressure: 80 psi (5.5
bar).
Maximum Supply Pressure: 120 psi
(8 bar).
Air Connections: 1/4˝ female NPT.
Air Consumption (per stroke): DA1:
1.71 in3; DA2: 9.34 in3; DA4: 20.5 in3;
DA6: 66.76 in3; DA7: 103.74 in3; SR2:
7.69 in3; SR3: 14.22 in3; SR6: 54.37 in3;
SR7: 85.43 in3; SR9: 215.11 in3.
Cycle Time (90°): DA1: .03 sec; DA2:
.04 sec; DA4: .12 sec; DA6: .27 sec;
DA7: .47 sec; SR2: .09 sec; SR3: .14
sec; SR6: .46 sec; SR7: .78 sec; SR9:
1.34 sec.
Housing Material: Anodized aluminum
body and epoxy coated aluminum
end caps.
Temperature Limit: -4 to 180°F (-20
to 85°C).
Accessory Mounting: NAMUR standard.
Standard Features: Position indicator. |
