Series AT22000 ATEX/IECEx Approved Series 2000 Magnehelic® Differential Pressure Gage

Flame-Proof Enclosure, Accurate within 2%

This Series is no longer available, please see Series AT-2000 for the suggested replacement.

Please see Series 2000 for non-ATEX/IECEx approved.

California Residents:  Click Here for Proposition 65 WARNING.

Specifications

Service:
Air and non-combustible, compatible gases.
Wetted Materials:
Consult factory.
Magnehelic® Housing:
Die cast aluminum case & bezel with acrylic cover; Exterior finish is coated gray to withstand 168 hour salt spray corrosion test.
Accuracy:
±2% of FS (±3% on -0, -100PA, -125PA, -10MM and ±4% on -00, -60PA, -6MM ranges), throughout range at 70°F (21.1°C).
Pressure Limits:
-20 in Hg to 15 psig (-0.677 bar to 1.034 bar); MP option; 35 psig (2.41 bar), HP option; 80 psig (5.52 bar).
Overpressure:
Relief plug opens at approximately 25 psig (1.72 bar), standard gages only. See overpressure protection note on Magnehelic® Gage catalog page.
Temperature Limits:
20 to 140°F (-6.67 to 60°C); Low temperature option: -20°F (-28.8°C); (Note: Product temperature limits are less than case limits).
Mounting Orientation:
Diaphragm in vertical position.
Enclosure Rating:
IP66. IP65 with option OPV, overpressure relief valve.
Housing material:
Aluminum.
Finishing:
Texture epoxy coat RAL7038.
Pressure Connections:
1/8" NPT female brass (SS optional). In presence of acetylene it is necessary to use SS.
Weight:
8.6 lb (3.9 kg).
ATEX Certificate:
BVI 14ATEX0072.
Agency Approvals:
ATEX Compliant CE 1370 Ex II 2G Ex d IIC T6 Gb / II 2D Ex tb IIIC T85°C Db, -60°C=Tamb=+60°C IECEx Compliant: Ex d IIC T6 Gb / Ex tb IIIC T85°C Db

Product Literature

Manuals

Catalog Pages

Product Data Sheet

Approvals

Drawings

Product Reviews

Only registered users can write reviews. Please Sign in or create an account