Series AT2605 ATEX/IECEx Approved 605 Differential Pressure

Series 605 in Flame-Proof Enclosure

Series AT2605 ATEX/IECEx Approved 605 Differential Pressure
  • Series AT2605 ATEX/IECEx Approved 605 Differential Pressure

View All Product Images

The ATEX/IECEx approved SERIES AT2605 Indicating Transmitter provides for both visual monitoring and electronic control of very low differential pressure in hazardous locations. The easily read dial gage is complimented by the two-wire, 4 to 20 mA control signal utilizing the time-proven Dwyer® Magnehelic® gage mechanical design and Series 600 transmitter technology. The two-wire design simplifies any 4 to 20 mA control loop powered by a 10 to 35 VDC supply. Flame-proof enclosures are available in aluminum and can include a glass window for viewing process pressure on gage face.

Important notes for installation:
• Cables must be fitted through 1/2" NPT cable gland or ATEX/IECEx conduit (not supplied with instrument).
• Make sure after cabling to close tight cover and cable gland, in order to keep IP66 rating (IP65 with option OPV, overpressure relief valve).
• Open cover only after de-energizing instrument.
• Attention: Check local safety rules and warnings on unit and manual for a correct use of the instrument in hazardous area.

Please see SERIES 605 for non-ATEX/IECEx approved.

California Residents:  Click Here for Proposition 65 WARNING.

Product Applications

  • Monitor pressures in ducts, rooms, or total building pressures
  • Filter monitoring
  • Local indication of clean room pressures with process signal sent to control room
  • Hazardous area pressure measurement and transmitter

Models & Ordering

Shipping Information

All shipping times are dependent on product availability at time of shipment.

Although we make every effort to ensure a continuous supply of our products, occasional circumstances may force us to temporarily run out of a product, or have shipping delays. Should this occur, customers will be notified soon after placement of any orders for such products and, if applicable, items will be put on backorder. For orders requiring expedited shipment, our customer service team can be contacted to confirm product availability

Build Your Custom Part. Use our Product Configurator

Specifications

GAGE SPECIFICATIONS
Service:
Air and non-combustible, compatible gases.
Wetted Materials:
Consult factory.
Accuracy:
See 605 ordering page.
Pressure Limits:
See 605 ordering page.
Temperature Limits:
20 to 120°F (-6.67 to 48.9°C); (Note: Product temperature limits differ from case).
Size:
4" (101.6 mm) dial face.

TRANSMITTER SPECIFICATIONS
Accuracy:
See 605 ordering page (includes linearity, hysteresis, repeatability).
Compensated Temperature Range:
32 to 120°F (0 to 48.9°C).
Thermal Effect:
±0.025% FS/°F (0.045% FS/°C).
Stability:
±1% FS/year.
Power Requirements:
10 to 35 VDC (2-wire).
Output Signal:
4 to 20 mA.
Zero and Span Adjustments:
Protected potentiometers on 605 face. Can access those by opening case. Allowed only in safe zone.
Loop Resistance:
DC: 0 to 1250 Ω max.
Current Consumption:
DC: 38 mA max.
Electrical Connections:
Screw terminal block.
Mounting Orientation:
Diaphragm in vertical position.
Enclosure Rating:
IP66. IP65 with option OPV, overpressure relief valve.
Housing Material:
Aluminum.
Finishing:
Texture epoxy coat RAL7038.
Pressure Connections:
1/8" NPT female brass (SS optional). In presence of acetylene it is necessary to use SS.
Electrical Connections:
Two 1/2" FNPT. Cable gland not included.
Weight:
12.6 lb (5.7 kg).
ATEX Certificate:
BVI 14ATEX0072.
Agency Approvals:
ATEX Compliant CE 1370 Ex II 2G Ex d IIC T6 Gb / II 2D Ex tb IIIC T85°C Db, -60°C=Tamb=+60°C IECEx Compliant: Ex d IIC T6 Gb / Ex tb IIIC T85°C Db

Features

  • ATEX housing provides all the capabilities and value of the Magnehelic® 605 in a flame & explosion-proof enclosure
  • Quick response to pressure changes means no delay in assessing critical situations
  • Durable and rugged housing and high-quality components combined provides longservice life and minimized down-time
  • High impact strength and high temperature rated for applications where hazardous environments exist

Videos

Model Chart

EXAMPLE AT2605 00N X A B 1 X T2 Series AT2605-00N-X-AB1XT2 Magnehelic® Indicating Transmitter with ATEX/IECEx enclosure, range 0-.05-0-0.20" w.c., aluminum housing, blind top cover, 1/8" npt female brass pressure port, standard plug without overpressure relief valve, stainless steel tag
SERIES AT2605               Magnehelic® Indicating Transmitter with ATEX Enclosure
RANGE  

00N
11
0
1
2
3
6
10
20
30
50
60PA
125PA
250PA
500PA

            

0.05-0-0.20" w.c.
0.25-0-0.25" w.c.
0-.50" w.c.
0-1.0" w.c.
0-2.0" w.c.
0-3.0" w.c.
0-6.0" w.c.
0-10.0" w.c.
0-20.0" w.c.
0-30.0" w.c.
0-50.0" w.c.
0-60 Pa
0-125Pa
0-250Pa
0-500Pa
CONSTRUCTION     X           Standard Construction
HOUSING MATERIAL       A         Aluminum
COVER         B
O		       Blind Top Cover
Glass Top Cover
PRESSURE CONNECTION           1
2		     1/8" npt female Brass Pressure Port
1/8" npt female Stainless Steel Port
OVERPRESSURE PLUG            

X
OPV

   Standard without Overpressure Relief Valve
Overpressure Relief Valve material same as port
TAG               T2 Stainless Steel Tag

 

Product Literature

Manuals

Catalog Pages

Product Data Sheet

Approvals

Drawings

Photo Downloads

You must be logged in to view this content.
Click here to login to your account.

Product Reviews

Only registered users can write reviews. Please Sign in or create an account