Series DPG-200 Digital Pressure Gage
3-in-1: Gage, Transmitter and Switch
The Series DPG-200 Digital Pressure Gage has a precise ±0.25% full scale accuracy. The 4 digit digital display will reduce the potential for errors in readings by eliminating parallax error commonly produced with analog gages. The DPG-200 is packaged in a durable extruded aluminum case designed to meet NEMA 4X (IP66). The unit is powered by 12-24 VDC/VAC and contains two alarm set points along with a 4-20 mA process output. A four-button keypad allows easy access to features. These features include backlight, peak and valley, auto zero and conversion of the pressure units.
NIST CALIBRATION available in Product Configurator.
Product Applications
- Level Control
- Pump Control
- Process Control
- Compressor Control
Models & Ordering
Specifications
- DIGITAL GAGE SPECIFICATIONS
- Service:
- Liquids and non-combustible compatible gases.
- Wetted Materials:
- Type 316L SS.
- Housing:
- Black polycarbonate front & back cover, anodized aluminum extruded housing with recessed grooves, polycarbonate overlay, Buna-N O-rings, 316L SS sensor construction.
- Accuracy:
- 0.25% F.S. ±1 least significant digit. (Includes linearity, hysteresis, repeatability).
- Pressure Limit:
- 2x pressure range for models 1000 psi; 5000 psi for 3000 psi range; 7500 psi for 5000 psi range.
- Temperature Limits:
- 32 to 158°F (0 to 70°C).
- Process Connection:
- 1/4" male NPT.
- Display:
- 4 digit (.425" H x .234" W digits).
- Size:
- 3.00" OD x 1.90" deep (not including cables).
- Weight:
- 8.84 oz (275 g).
- SWITCH SPECIFICATIONS
- Switch Type:
- 2 SPDT Form C contacts.
- Electrical Rating:
- 0.5 A @ 125 VAC resistive, 1 A @ 24 VDC.
- Relay Differential:
- 1 least significant digit.
- Electrical Connections:
- 3 ft (.91 m) cable.
- Mounting Orientation:
- Mount in any position.
- Set Point Adjustment:
- Via menu.
- TRANSMITTER SPECIFICATIONS
- Temperature Limits:
- 0 to 158°F (0 to 70°C).
- Thermal Effect:
- Between 70 to 158°F = 0.016%/°F. Between 0 to 70°F = 0.026%/°F.
- Power Requirements:
- 12-24 VAC +/- 20% 50-400 Hz, 12-24 VDC +/-20%.
- Output Signal:
- 4-20 mA.
- Loop Resistance:
- 600 ohms maximum.
- Power Consumption:
- 0.8 W max.
- Electrical Connections:
- 3 ft (.91 m) cable.
- Enclosure Rating:
- Designed to meet NEMA 4X (IP66).
Features
- High accuracy provides exceptional measurement minimizing costly out of specification conditions
- Backlit 4-digit display provides clear parallax-free reading reducing potential for errors
- Durable aluminum case to meet NEMA 4X (IP66) requirements supports use in harsh or outdoor environments
- Push-button zero reduce installation and service time
Videos
Model Chart
EXAMPLE | DPG | 200 | AI | Series DPG-201-AI Digital Pressure Gage, range 0-5 psig, with added information to label. |
SERIES | DPG | Digital Pressure Gage | ||
RANGE | 201 202 203 204 205 206 207 208 209 210 211 215 |
0 to 5 psig 0 to 15 psig 0 to 30 psig 0 to 50 psig 0 to 100 psig 0 to 200 psig 0 to 300 psig 0 to 500 psig 0 to 1000 psig 0 to 3000 psig 0 to 5000 psig 0 to 8000 psig |
||
OPTIONS | AI BSPT NIST PM SPCL |
Added Information to Label BSPT G1/4 Thread NIST Certificate of Calibration Panel Mount Bezel Special Cleaning |
Approvals
Drawings
Questions
- Question
- A customer would like to get switching capability, local pressure indication, and a 4-20 mA output signal all in one device. Do we have a product to offer them?
- Answer
- Yes. The DH, DHII or DH3 possess high/low set points, digital gage display and 4-20 mA full scale output signal for air and compatible gas. The EDA, DPG-200, DPT and the MDPC possess high/low set points, digital gage display and 4-20 mA full scale output signal for compatible fluids.
- Question
- I have a DPG-200 Digital Pressure Gauge. I need to know if Dwyer can make them with a 90 Degree fitting or elbow, or with the fitting coming out of the back of the gauge?
- Answer
- The DPG-200 Digital Pressure Gage is only available with a bottom connection. Having a back connection would not be feasible due to the electrical connection already existing at the back. However, one would have the option of connecting a Series A-2022 (purchased separately) SS elbow to the bottom connection.
Photo Downloads
You must be logged in to view this content.Click here to login to your account.
Product Reviews
Only registered users can write reviews. Please Sign in or create an account